Best Barns tahoe_1216f Bedienerhandbuch PDF herunterladen (Seite 9)

If installing the building on a cement slab cut the siding flush with the bottom plate.

Square wall frame before installing siding. Measure diagonally (corner to corner).

The measurements will be the same when the wall is square.

Pre-cut wall stud will measure 92-5/8" or 92-1/4" in length.

If you are installing the optional walk-in door see the instructions at Step 24.

Step 6 & 7 Apply Siding and Trim to Rear Roof Gable

1. Install pre-cut siding on the rear gable frame.

Blue Marks on End

2. Install (2) two 61" long 1x4 gable trim flush with the top edge of the gable.

Install the ends with blue marks together. Install trim with 8d galv. nails.

3. Install (2) two 42-1/2" long 1x4 gable trim

flush with the side edge of the gable.

LAP Edge

Siding Extends 3/4" Below Plate

Notes on assembling wall frames.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Keine Kommentare

Best Barns tahoe_1216f Bedienerhandbuch Seite 9