Best Barns tahoe_1216f Bedienerhandbuch PDF herunterladen (Seite 7)

32-3/4"

Step 4 Assemble Roof Gables

1. Position (2) two truss halves together and secure the top with a 1"x4" barbed metal plate.

2. Nail a 32" long 2x3 board to the truss at the ridge with 10d sinkers.

3. Cut a 45" long 2x4 to length and install in the center of the gable. Secure the bottom by

nailing through the plate with (2) two 10d sinkers. Secure the top with a barbed metal plate.

4. Install two 40-3/4" long 2x4 gable studs in the center of the gable frame. Secure the same

procedure as the center 2x4. They should be spaced 42-3/4" apart, (+) or (-) 1/4".

5. Install (2) two 30-3/4" long 2x4s the same way.

6. Nail truss leg to 12' Gable Plate with 10d sinkers.

30-3/4" Long 2x4

45" Long 2x4

40-3/4" Long 2x4

32" Long 2x3 Block

If you want the loft doors to open, repeat steps 1-6 substituting

number 3 with directions below:

3. Cut a 45" long 2x4 gable stud and install

between the center gable studs. Secure

with 1"x4" metal barbed plates. Install

this board 32-3/4" from the 2x4 plate.

7. Repeat steps to assemble the front roof gable. Read note below:

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

Best Barns tahoe_1216f Bedienerhandbuch Seite 7