Best Barns tahoe_1216f Bedienerhandbuch PDF herunterladen (Seite 3)

Optional Wood Floor System

6. Cut all the 2x4-12' boards to 11'-9". These boards will be the floor joist. Treated lumber

may be thicker than 1-1/2". Take this into account when cutting the length of floor joists.

Shorten joist measurements if necessary to obtain 12'-0" building width.

7. Install floor joist boards between the joist headers. Install this section over the 4x4s.

4. Cut (2) two 2x4-16' joist headers to 16' - 0".

5. Layout for 12" on center joist spacing. 'X' marks where floor joist will be placed.

Shown below is a typical wood floor. Depending on your area, the construction may have to be

changed to meet local codes. The foundation size should be 12' - 0" x 16' - 0".

12"11-1/4"

2x4 - 16' 0"

Joist Header

12"

1. Cut (2) two treated 2x4-8' boards in half.

2. Butt 4x4-8' treated runners together. Use one of

the 4' long 2x4s to secure them together.

3. Repeat to join the other 4x4 runners.

2x4-16' Joist Header

2x4-11' 9" Floor Joist

4x4 Runners

2' Long 2x4

4x4 Treated Runners

1 2 3 4 5 6 7 8 ... 23 24

Keine Kommentare

Best Barns tahoe_1216f Bedienerhandbuch Seite 3